Waterborne Single-Component Epoxy Floor Coating

20 Years of Waterborne Coating Excellence

Home - Product - Waterborne - Waterborne Single-Component Flooring System -

Waterborne Single-Component Epoxy Floor Coating

Waterborne Single-Component Epoxy Floor Coating
Waterborne Single-Component Epoxy Floor Coating

Waterborne Single-Component Epoxy Floor Coating

Waterborne single-component epoxy floor coating is ready to apply right after stirring upon opening, no extra hardener required, simple and convenient. Formulated with modified resin as the main film-forming material, together with pigments, fillers and additives, it forms a tough film after curing with dust-proof, wear-resistant, waterproof and light oil-stain resistant performance.

 

Flexible application by roller, brush or spray with fast drying speed. It offers good wear, dust-proof, moisture-proof and oil-stain resistance, suitable for decoration and protection of floors in workshops, plants, warehouses, parking lots and other areas. Rich colors are available, mostly used for light-load indoor floors to quickly achieve dust-proofing and beautification with simple maintenance.

 

As the topcoat material of the single-component floor system, it is easy to apply with fast film formation, offering good wear, dust-proof and easy-cleaning performance for various ordinary industrial and commercial floors.

Share:

Key Selling Points

Ready-to-use single-component: No hardener mixing required. Apply directly after thorough stirring, saving the mixing process. Even beginners can operate with low risk of mixing errors.

 

Easy application: Roller, brush and spray are all acceptable with fast drying speed, shortening the construction schedule.

 

Dust-proof & beautifying: Continuous and dense film locks floating dust on the floor, resists water splashes and light oil stains, and beautifies old floors.

 

Rich colors: Full range of standard colors with custom tinting support, matte or glossy finish available.

 

Simple maintenance: The film surface is easy to wipe and clean, with low later cleaning and maintenance cost.

Technical Parameter

Item Specification Remarks
Product Type Single-component floor coating Single-component, no hardener needed
Mixing Method Stir thoroughly after opening before application
Surface Dry Time (25℃) ≤6 h
Hard Dry Time (25℃) ≤24 h Light foot traffic after 24 h; best film performance after 7 days
Water Resistance Good Short-term water splashes are fine; not for long-term immersion
Application Temperature 5-35℃ Drying slows down at low temperature
Application Humidity ≤80% Substrate must be free of condensation
Substrate Moisture Content ≤10% Substrate must be solid and dry
Storage Store sealed in a cool, dry place away from fire
Shelf Life 12 months Sealed and unopened

Application Scenario

Light-load indoor floors

01

Light-load indoor floors

Applicable Sites: Light-load indoor floors such as ordinary workshops, warehouses, corridors, simple garage renovation, shops, dormitories, offices and balconies

 

Applicable Substrates: Solid concrete and cement-mortar floors, dry and dust-free (better effect with the single-component primer)

 

RELEVANT CASES

Mountain Wild Cave Guesthouse Wall and Floor Coating Project

Mountain Wild Cave Guesthouse Wall and Floor Coating Project

This case study showcases a mountain guesthouse designed with a "cave-like" theme. The design utilizes large areas of white micro-cement textured walls and arched ceilings, incorporating hidden lighting strips to create a soft, natural, and immersive living atmosphere. The guesthouse includes a living room, bedroom, kitchen, corner bay window, and other multi-functional spaces.

Epoxy Flooring in the Underground Garage of Beilun Residential Community, Ningbo

Epoxy Flooring in the Underground Garage of Beilun Residential Community, Ningbo

This project involves an underground parking garage at a construction site/residential community in Beilun, Ningbo. The original base layer was a cement floor, and the garage floor needed to be completely coated while ensuring construction quality and meeting the project schedule.

Indoor Sports Flooring for a Malaysian Client

Indoor Sports Flooring for a Malaysian Client

This case study is an indoor sports venue for a Malaysian client. The venue was converted from a steel-structured factory building and includes a basketball court and multi-level stands.

READY TO START A PROJECT?

READY TO START A PROJECT?

We offer customized high-end water-based paint products and coating solutions. Our professional team is involved throughout the process, precisely meeting your product requirements.

Get Quote >>

RELATED PRODUCTS

Trusted by Clients in 30+ Countries