High-Penetration Epoxy Sealer Primer
20 Years of Waterborne Coating Excellence
High-Penetration Epoxy Sealer Primer
Two-component solvent-free epoxy primer is a solvent-free two-component epoxy resin sealing primer, composed of low-viscosity epoxy resin and matching curing agent, free of volatile solvents, eco-friendly with low odor. With excellent penetration it infiltrates capillary pores of concrete substrates, sealing substrate moisture and dust, effectively improving the bonding of intermediate and topcoats to the concrete base and preventing blistering and delamination of the flooring system.
Low viscosity and good wettability, suitable for concrete and cement-mortar substrates. As the first sealing layer of epoxy flooring systems, it is widely used with epoxy colored sand, epoxy self-leveling and epoxy mortar toppings. The solvent-free formula suits indoor enclosed spaces; after curing it is dense, functioning as sealing, anchoring and reinforcement of the substrate.
As the base priming material of the flooring system, it offers excellent adhesion and sealing performance, effectively enhancing the bonding between topcoats and the substrate, compatible with various epoxy floor toppings.
Share:
Key Selling Points
Strong penetration & sealing: Low viscosity penetrates concrete capillary pores, traps floating dust, blocks rising gas and moisture, preventing blistering.
Excellent adhesion: Bonds firmly to cement substrates; as an interlayer it improves the bonding strength of subsequent intermediate and top coats.
Solvent-free & eco-friendly: Solvent-free with low VOC and low odor, suitable for enclosed indoor spaces such as plants and basements.
Stable performance after curing: High mechanical strength after curing, water and weak-chemical resistant, no chalking.
Easy application: Roller or squeegee application, good leveling, fills fine pinholes with high construction efficiency.
Technical Parameter
| Item | Specification | Remarks |
| Mixing Ratio (A:B) | 3:1 (A:6 kg + B:2 kg / set) | Mix strictly by ratio; refer to package label |
| Pot Life (25℃) | 30-40 min | Do not use after gelation |
| Surface Dry Time (25℃) | ≤6 h | |
| Hard Dry Time (25℃) | 12 h | Next coat can be applied after hard dry |
| Recommended Coverage | 0.2-0.3 kg/㎡ (one coat) | Adjust according to substrate porosity |
| Dry Film Thickness | 30-60 μm | Two thin coats recommended for porous substrates |
| Tensile Bond Strength (concrete) | ≥2.5 MPa | |
| Water Resistance | Good | Waterproof after curing |
| Application Temperature | 5-35℃ | Curing slows below 5℃ |
| Application Humidity | ≤80% | Substrate must be free of condensation |
| Substrate Moisture Content | ≤8% | New concrete cured ≥28 days |
| Storage | Store sealed in a cool, dry, dark place away from fire | Components A and B stored separately |
| Shelf Life | Refer to package label |
Application Scenario
01
Application Scenario
Matching Systems: Base sealing for epoxy colored sand, epoxy self-leveling, epoxy mortar and anti-static flooring
Applicable Substrates: Concrete substrates, cement-mortar leveling layers
Application Sites: Substrate treatment of indoor floors in plants, underground garages, exhibition halls, offices, commercial spaces and laboratories
RELEVANT CASES
READY TO START A PROJECT?
We offer customized high-end water-based paint products and coating solutions. Our professional team is involved throughout the process, precisely meeting your product requirements.
RELATED PRODUCTS
Trusted by Clients in 30+ Countries