Solvent-Free Epoxy Floor Coating

20 Years of Waterborne Coating Excellence

Home - Product - Solvent-Free - Solvent-Free Epoxy Flooring System -

Solvent-Free Epoxy Floor Coating

Solvent-Free Epoxy Floor Coating
Solvent-Free Epoxy Floor Coating
Solvent-Free Epoxy Floor Coating
Solvent-Free Epoxy Floor Coating

Solvent-Free Epoxy Floor Coating

Two-component solvent-free intermediate coat (solvent-free floor coating) is a two-component flooring material composed of special epoxy resin and matching solvent-free curing agent, free of volatile organic solvents, low VOC, with low odor during application, belonging to eco-friendly thick-film flooring systems. With excellent leveling it forms a seamless, dense and solid floor layer after curing, featuring high hardness, wear and impact resistance, waterproofness, oil-stain resistance and resistance to weak acids and alkalis.

 

It can be applied as self-leveling or mortar flooring, or combined with colored quartz sand for textured colored-sand floors; suitable for various indoor heavy-load floors with high cleanliness requirements, balancing practical protection and decoration, widely used in industrial plants, underground garages, exhibition halls, laboratories and commercial spaces.

 

The complete flooring system includes solvent-free primer, intermediate coat and topcoat; using them together delivers the best performance.

Share:

Key Selling Points

Solvent-free eco formula: No volatile solvents, low VOC, low odor in enclosed spaces, meeting indoor environmental requirements.

 

Seamless dense protection: Forms an integrated seamless layer after curing, dust and waterproof, blocking oil penetration, resistant to dirt accumulation.

 

Excellent mechanical performance: High hardness after curing, wear, heavy-load and impact resistant, withstands frequent forklift and vehicle traffic with long service life.

 

Chemical resistance: Resistant to machine oil, detergents, weak acids and alkalis, suitable for workshops and garages prone to contamination.

 

Diverse decoration: Rich customizable colors; gloss / semi-matte / matte finishes; available as solid-color self-leveling, mortar flooring or epoxy colored-sand flooring.

 

Easy cleaning & maintenance: Smooth dense surface, dust and stains can be wiped with neutral detergent, low maintenance cost.

Technical Parameter

Item Specification Remarks
Mixing Ratio (A:B) 9:1 (A:9 kg + B:1 kg / set) Mix strictly by ratio; refer to package label
Pot Life (25℃) 25-35 min Do not apply after gelation
Surface Dry Time (25℃) ≤12 h
Hard Dry Time (25℃) 24 h Light foot traffic after 24 h; full cure and highest strength after 7 days
Water Resistance Good No blistering or peeling after long-term immersion
Chemical Resistance Water, machine oil, weak acids, weak alkalis, detergents Not resistant to concentrated strong acids or strong oxidizers
Application Temperature 5-35℃ Curing slows significantly below 5℃
Application Humidity ≤80% Substrate must be free of condensation
Substrate Moisture Content ≤8% Apply after primer and intermediate coat fully cured
Storage Store sealed in a cool, dry, dark place away from fire Components A and B stored separately
Shelf Life Refer to package label

Application Scenario

Application Scenario

01

Application Scenario

Application Sites: Indoor floors of industrial plants, underground parking, exhibition halls, high-end offices, shopping clubs, laboratories and warehouses

 

Applicable Substrates: Concrete / cement-mortar substrates after grinding with epoxy primer and intermediate leveling coats

 

System Matching: Can be used as the floor topcoat alone, or with quartz sand as mortar flooring

 

RELEVANT CASES

Mountain Wild Cave Guesthouse Wall and Floor Coating Project

Mountain Wild Cave Guesthouse Wall and Floor Coating Project

This case study showcases a mountain guesthouse designed with a "cave-like" theme. The design utilizes large areas of white micro-cement textured walls and arched ceilings, incorporating hidden lighting strips to create a soft, natural, and immersive living atmosphere. The guesthouse includes a living room, bedroom, kitchen, corner bay window, and other multi-functional spaces.

Epoxy Flooring in the Underground Garage of Beilun Residential Community, Ningbo

Epoxy Flooring in the Underground Garage of Beilun Residential Community, Ningbo

This project involves an underground parking garage at a construction site/residential community in Beilun, Ningbo. The original base layer was a cement floor, and the garage floor needed to be completely coated while ensuring construction quality and meeting the project schedule.

Indoor Sports Flooring for a Malaysian Client

Indoor Sports Flooring for a Malaysian Client

This case study is an indoor sports venue for a Malaysian client. The venue was converted from a steel-structured factory building and includes a basketball court and multi-level stands.

READY TO START A PROJECT?

READY TO START A PROJECT?

We offer customized high-end water-based paint products and coating solutions. Our professional team is involved throughout the process, precisely meeting your product requirements.

Get Quote >>

RELATED PRODUCTS

Trusted by Clients in 30+ Countries