Marble & Granite Effect Multicolor Paint
20 Years of Waterborne Coating Excellence
Marble & Granite Effect Multicolor Paint
Exterior imitation marble coating is a waterborne multicolor stone-effect coating, made by wrapping multicolored waterborne color dots with high-performance silicone-acrylic / pure acrylic emulsion as the binder, forming a single-component waterborne system. After spray application, it highly reproduces the texture and feel of natural marble and granite with high fidelity.
Its weight is far lower than dry-hanging stone, light and safe. It offers excellent UV resistance, rain erosion resistance, crack resistance, water and stain resistance, without fading or chalking in long-term outdoor use. The waterborne formula is eco-friendly with low odor, applied by spraying. With jointing it presents a high-end stone decoration effect, an ideal alternative to natural stone for villas, buildings and exterior wall renovation.
Share:
Key Selling Points
Realistic stone effect: Rich color-dot patterns, customizable marble and granite colors, realistic flat stone texture, jointing available for dry-hanging effect.
Long-lasting outdoor durability: UV aging resistant, resistant to rain and freeze-thaw cycles, no fading, chalking or peeling, long-term exterior protection.
Lightweight & safe: Far lighter than natural dry-hanging stone, no additional building load, no safety risk of stone falling.
Waterproof & stain resistant: Dense and breathable film with lotus effect against dirt, rain self-cleaning, stains easy to wash off.
Flexible anti-cracking: The elastic film covers fine wall cracks and adapts to thermal expansion and contraction of the wall.
Waterborne & eco-friendly: Water-based, low VOC, no strong irritating odor, meeting environmental standards for architectural coatings.
Technical Parameter
| Item | Specification | Remarks |
| Product Type | Waterborne single-component multicolor imitation marble coating | Single-component, stir after opening, spray with dedicated gun |
| Dilution | Not recommended; add clean water ≤5% if needed | Over-dilution damages color dots, causing scattered dots and blooming |
| Surface Dry Time (25℃) | ≤12 h | |
| Recoat Interval (25℃) | ≥24 h | Topcoat only after the main material is fully dry |
| Application Temperature | 5~35℃ | Film formation fails below 5℃ |
| Application Humidity | ≤85% | No application in rain, strong wind or condensation |
| Substrate Moisture Content | ≤10%, pH < 10 | Wall must be dry; sealing primer required if alkalinity exceeds the limit |
| Storage Condition | 5~35℃, cool and sealed, frost-proof, avoid direct sunlight | |
| Shelf Life | 12 months | Original unopened package, strictly no freezing |
Application Scenario
01
Exterior cement-mortar walls
Applicable Substrates
Exterior cement-mortar walls, exterior putty leveled walls, thermal insulation wall substrates, and sound substrates of old exterior walls for renovation.
Applicable Sites
Exterior wall decoration of villas, high-rise buildings, hotels, office buildings, schools and more.
RELEVANT CASES
READY TO START A PROJECT?
We offer customized high-end water-based paint products and coating solutions. Our professional team is involved throughout the process, precisely meeting your product requirements.
RELATED PRODUCTS
Trusted by Clients in 30+ Countries